Dusty Manual
Collections
Read the manual by theme: getting started, understanding machining, coming from laser, holding the work, preparing a job, running the machine, series and solving a problem.
The manual can also be read by collections: reading paths that gather, in a useful order, the topics of one theme. Choose a collection at the top of the contents: only its topics stay there and the page goes to the first one; the search still covers the whole manual. Whole manual brings back the full contents.
- Getting started: Safety, System requirements, First-launch tour, Dusty’s screen, First part step by step, Beginner mode, Example projects, Before sending an example to the machine.
- Understanding machining: Concepts, From drawing to G-code, Router bits, Tool side, Cut direction, Feed, speed and chip load, Stepover and depth per pass, Origin, zeros and coordinates, Heights and rapid moves.
- Coming from laser: Coming from laser software, Importing, Paint colors, Creating an operation, Tool side, Radius, notches and dogbones, Tabs, Workholding.
- Holding the work: Workholding, Choosing and checking, Screwing to the spoilboard, Clamps, Double-sided tape, Masking tape and cyanoacrylate glue, Jigs and indexing fixtures, Machinable brads, Vacuum table, Table-mounted vise, Through cuts, Travel heights, Running a job.
- Preparing a job: Project setup, Origin and Z zero, Creating an operation, Common settings, Project tools, Feeds and speeds calculator, Preview, 3D check, Pre-send check, Saving the G-code.
- Running the machine: Connection, Connection assistant, The Machine panel, Moving and homing, Work zero, Probing, Running a job, Pause, stop and STOP, Tool change, Resuming an interrupted job, No-go zones, Hour counter and maintenance, Dusty Link and Hub mode, Joining a shared machine.
- Series and production: Pages, Variable text, Barcodes and QR codes, Virtual arrays, Nesting, Operation library, Project templates, Jigs and indexing fixtures.
- Solving a problem: My Machining Is…, Preview troubleshooting, Incident cards, Console, Troubleshooting, Debug log, Support data.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.