Skip to content

The machine

Pause, stop and STOP

The difference between pause, pause with retract, stop job and STOP, their shortcuts, and what to do after an alarm 3 when the position is lost.

CommandEffect
Pause (click)Immediate pause: the machine slows down and stops on its path, spindle running.
Pause with Retract (Pause button menu)The tool rises in Z and the spindle stops: to inspect or clear chips.
Resume…Resumes after a pause, a tool change or a program stop, after your agreement: “The Spindle Will Restart”.
Stop JobControlled stop: the machine comes to rest, keeps its position, the spindle is turned off. The interrupted job can be resumed.
STOP (⌘., red button)Immediate reset of the controller: motion interrupted, job abandoned, spindle and coolant off.

With the keyboard (Machine menu): Pause Job or Resume Job… (⌃⌘P; resuming always asks for your agreement), Stop Job (⌥⌘.), Reconnect (⌃⌘R). In Dusty Studio’s Machine tab, outside a field: P pauses or resumes, Shift+S stops the job; anywhere in Studio, Ctrl+Alt+Shift+C (⌥⇧⌘C on a Mac, can be changed in the shortcut editor) reconnects the machine, like the Reconnect button: the link is closed cleanly, then opened again with the same choices (refused during a job).

After a STOP during a move, GRBL goes into alarm (alarm 3) and the position may be lost: home the machine (or set the work zero again on a machine without limit switches) before going on. The accessory stop commands chosen in the profile are sent after the reset.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.