The machine
Jogging and homing
Move the tool with the jog arrows or the keyboard, by step or continuously, home all axes or a single one, and unlock a machine in alarm once the cause is fixed.
Jog section:
- Arrows for X and Y in a cross, Z on the right; the central button stops the current move (it is not an emergency stop).
- XY step and Z step (from 0.01 to 50 mm), XY speed and Z speed (from 100 to 3000 mm/min).
- Continuous jog: holding an arrow moves the tool until you release it (if the machine accepts native
$Jjogging). For safety, Dusty keeps renewing the order: if the interface stops responding, the motion stops by itself. - Home (
$H, if the machine has limit switches): the tool looks for its switches and sets the machine zero. X, Y and Z next to it (Studio: $HX, $HY, $HZ) home a single axis, if the controller accepts it: FluidNC, grblHAL when bit 1 of$22is set, GRBL 1.1 only if it was built with this option (otherwise it answerserror:3without moving, and Dusty explains it in the console). The machine is referenced only once all three axes are done, together or one by one. - Keyboard jog: click Keyboard Jog (in Dusty Studio, one of the arrows); while the jog arrows have the keyboard, the arrow keys move in X and Y, Page Up and Page Down in Z, and the numeric keypad too (4 and 6 for X, 8 and 2 for Y, 9 and 3 for Z); Shift multiplies the step by 10, ⌥ (Alt) divides it by 10, Esc (or 5) stops the move. In continuous jog, the held key moves the tool until it is released. These keys do nothing elsewhere: neither in a field nor on the canvas.
Without homing, machine coordinates are not reliable: Dusty says so, and the features that depend on them (saved positions, tool length sensor) require it. A locked machine (alarm) is released by homing or by Unlock, once the cause is dealt with.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.