Skip to content

The machine

Incident cards

At each GRBL alarm or error, a card explains the cause in context, lists the checks and offers one-click actions such as unlock, home or probe again.

At each alarm (ALARM:n) or error (error:n) of the controller, an incident card appears in the Machine panel: a clear title, the cause according to what the machine was doing (job, probing, homing), steps to check off when there is a procedure, and one-click actions: unlock, home, reset, move the tool clear with the jog, probe again, switch to synchronous streaming (for an error 8 repeated during a job). No action starts the spindle or a job. A lost position is reported: home the machine before any job.

Understand and Fix… opens the My Machining Is… assistant on that incident. Close Card removes it.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.