Dusty Manual
Concepts
The basic ideas of CNC machining explained once: toolpaths and G-code, router bits, tool side, cut direction, feeds and chip load, stepover, zeros and heights.
The basic ideas of machining, explained once and for all: the other topics refer to them. They apply to any CNC router; the setting names are Dusty’s.
In this section
-
From drawing to G-code
The four steps Dusty goes through — drawing, operations, toolpaths, G-code — and what G0, G1, G2, G3, M3 and M5 mean in the program it writes.
-
Router bits
Flat end mills (up-cut, down-cut, compression), ball nose bits, V-bits and drill bits: what each one is for, and why the cutting diameter must be exact.
-
Tool side
On the line, outside or inside: where the center of the bit runs relative to the drawing, and which choice keeps the exact size of a part or of a hole.
-
Cut direction
Climb or conventional milling: how each tooth meets the material, which gives the better finish, and which forgives the backlash of light machines.
-
Feed, speed and chip load
Feed, spindle speed and number of flutes give the chip load: the formula, a worked example, and what happens when the chip is too thin or too thick.
-
Stepover and depth per pass
How deep the bit goes at each pass and how far apart side-by-side passes are, with starting values for a desktop CNC in wood, plywood and aluminum.
-
Origin, zeros and coordinates
Machine coordinates and machine zero, the work zero you set on the stock, the project origin that matches it, and why the Z zero sets every depth.
-
Heights and rapid moves
Why rapid moves need a safe height above every clamp, what the fast retract between shapes does, and what the pre-send check cannot see.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.