Skip to content

Dusty Manual

Getting Started

The welcome tour that sets up your machine, a guided look at the window, a first part step by step, the iPad app, beginner mode and advice for laser users.

In this section

  • Welcome tour

    At first launch, a short animated tour chooses your machine, recalls the safety rules, then offers an example project, the project assistant or a blank page.

  • The Dusty window

    The canvas sized to the stock, the origin marker, the drawing tools, the paint colors, the status bar, the toolbar and the five panels of the inspector.

  • First part step by step

    Cut an 80 × 50 mm rectangle out of 6 mm plywood: project, drawing, tool, outside profile with tabs, preview, work zero, then framing and starting the job.

  • On iPad

    The iPad app adapted to touch: canvas gestures, Apple Pencil, keyboard and trackpad, multiple windows, network machines and what to know while machining.

  • Beginner mode

    A simpler Dusty while you learn: new projects open on the assistant, some tools and the fine operation settings are hidden, and nothing is lost when you turn it off.

  • Coming from laser software

    What carries over from laser software and what changes with a router: bit diameter, rounded inside corners, depth per pass, holding the stock, tabs and work zero.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.