Skip to content

Getting Started

Welcome tour

At first launch, a short animated tour chooses your machine, recalls the safety rules, then offers an example project, the project assistant or a blank page.

At first launch, Dusty opens a short animated tour (full screen on iPad, on iPhone and in a narrow window): a welcome screen where the Dusty symbol draws itself, then four steps. It is the same in the Mac, iPad and iPhone app, in Dusty Studio and in the desktop app.

  1. From drawing to part: the four moves, always in the same order — draw, choose the operations, check the preview, machine on the machine.
  2. Which machine do you have? The preset CNC 3018, Find My Machine (Dusty looks for it over USB and on the network), a machine from the catalog (manufacturer then model, see Machines and catalog) or no machine yet (a dummy machine; the virtual CNC lets you try everything). With a machine already set up, the tour offers to keep it. You then check its travel, origin and spindle; when you continue, the profile is saved and becomes the active machine: nothing is connected, nothing moves, the spindle stays off.
  3. Safety first: protection, clamping, dry run, supervision, STOP and the emergency stop.
  4. You’re all set!: where to start — Open an Example Project (recommended, see Example projects), Project Assistant (see Project assistant), Blank Page, and Connection Assistant (see Connection assistant) when the machine can be driven and is not connected yet; below, the beginner mode and usage statistics, which you can change later in Settings.

Continue (Return) goes to the next step, Back goes back and keeps your choices; Skip (Escape) closes the tour at any time; the Machine panel then offers Add a Machine…, which reopens it on these steps. The animations follow the system’s “Reduce Motion” setting (and, in Dusty Studio, the one in Settings): each scene is then shown in its final state right away. The tour does not come back by itself: Help › Dusty Tour opens it again (More › Dusty Tour on iPad and iPhone; also on the Dusty Studio start screen). If you had seen the former four-screen tour of Dusty Studio, you see the new one once.

In Dusty Studio and the desktop app

The ← and → arrow keys go back and forward, Tab moves from one choice to the next without leaving the tour, F1 opens this topic; each scene is described to screen readers and the progress is written out (“Step 2 of 4”). On the first visit, the generic CNC 3018 added by default gives way to the machine you choose (keeping the CNC 3018 changes nothing). Beginner mode can then be changed in the View menu, usage statistics in the Help menu.

Dusty Studio and desktop app start screen

At launch, as long as no project is open (a project opened from the system is shown directly), and after File › Close Project (after confirmation if the project has changed). On the icon’s paper color in light mode and its graphite in dark mode: the Dusty symbol and name, then New Project, Example Projects and Open… (with their shortcuts), your recent projects (desktop app; Chrome and Edge in the browser), the Dusty Tour, the Manual and the language choice. Dropping a project or a drawing on the window opens it too. It fits in a narrow window (Dusty Studio opened on a phone): the actions stack one under the other.

iPad and iPhone launch screen (iPadOS and iOS 18 and later): the Dusty symbol and name, New Project, Example Projects (a new project that offers the examples right away), then your projects below.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.