Skip to content

The project

Project assistant

A new project in a few explained questions: machine, units, stock, origin, heights, first operation and its tool; after Finish, all that is left is to draw.

The step-by-step assistant prepares a new project in a few questions, each explained: machine (the workshop’s one, or Choose or Add a Machine…), units, stock (with its diagram), origin and Z zero, travel heights, first operation (profile, pocket, drilling, V-carving, or none), its tool (taken from the library, among the suitable ones), then a summary. Finish applies the settings as one undoable action, adds the tool and the operation; the operation automatically machines the shapes of the active paint color: all that is left is to draw. The suggested values are fine to try things out.

It opens when you create a project if Settings › Project › “New project setup” is Step-by-Step Assistant (and always in beginner mode), or through File › Project Assistant…. Advanced Setup switches to the full page; on that page, Step-by-Step Assistant goes back to the assistant. The last choice is kept for the next projects.

From the first step, Open a MillMage or LightBurn Project… fills the project from another program: the assistant closes without applying anything, then the project is imported (see MillMage projects).

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.