Skip to content

Importing and exporting

MillMage projects

Open a MillMage .mage project in Dusty with its shapes, layers, tools, operations, tabs and setup, then read the report on what to check before machining.

A MillMage project (.mage) opens in Dusty with its shapes, operations, tools and project setup:

  • Mac and iPad: in the presentation of a new project, Open a MillMage or LightBurn Project…; or File › Import… (⌘I) or a file dropped on the canvas. In an empty project, the MillMage project also brings its setup (stock, heights, origin, Z zero, units) and its notes; in a project in progress, its shapes, tools and operations are added and the project setup is kept. A single action, undone with ⌘Z.
  • Dusty Studio and desktop app: File › Open… (or a file dropped on the page) replaces the open project; File › Import… adds it to the current project, as on Mac.

The MillMage file is never rewritten: Save creates a .dusty project.

In MillMageIn Dusty
Project setup (stock, safe height, fast retraction, pocket lift, Z zero, units)Project setup, in an empty project. The MillMage machine is not brought in: Dusty machines with its active machine.
LayersPaint colors with the same number: their name and visibility.
Tools of the operationsProject tools, without duplicates (a tool used by several operations, or already in the project, is added once).
Profile (side: outside, inside, on the line), Pocket, Rest Pocket, V-CarvingOperations of the same type, with depths, passes, feeds (converted to mm/min), spindle speed, stepover, stock to leave, entry (plunge, ramp, spiral, helix), tabs, vacuum, coolant and color.
Other types (drilling, chamfer…)Operation of the same type: only the common settings (depths, feeds) are brought in, to be checked.
Tabs placed on shapes, start pointTabs placed by hand and start point of the shapes.

The report points out what has no equivalent (unknown shape or operation type, setting not brought in) and doubtful values, without ever preventing the opening:

  • an aberrant feed (above 30 m/min, 10 m/min when plunging, or far faster than its tool’s) is replaced by the tool’s;
  • a depth beyond the stock is kept but pointed out (the tool would cut into the spoilboard), as is a depth that looks like a value in inches or tabs higher than the cut;
  • an origin other than the bottom-left corner, whose match is not established, is set to the bottom-left corner: check it in the project setup before machining.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.