Skip to content

Compatibility

The CNC machines compatible with Dusty.

Look for your machine: each model below has a ready-made profile in Dusty, with its travel, machine zero and spindle. Not listed? The controller matters more than the brand, and the answer is further down.

67 machines

9 brands

14 G-code flavors

1,275 × 1,275 mm 145 × 148 mm
Every work area in the catalog, to the same scale.

All machines, by brand

List up to date for Dusty 1.1.0. The travel and the controller settings are read back when you connect: these work areas are a starting point. Check them, with the limit switches and the spindle, on your own machine.

Direct control
Dusty connects, frames, starts and follows the job.
New bridge
Driven through a bridge of Dusty’s own, tried on virtual boards so far: make your first tries in the air.

Carbide 3D machines

11 machines

Model Work area Controller Link Support
Carbide 3D Nomad 3 203 × 203 mm GRBL 1.1 USB · network Direct control
Carbide 3D Shapeoko 3 Standard 406 × 406 mm GRBL 1.1 USB · network Direct control
Carbide 3D Shapeoko 3 XL 838 × 406 mm GRBL 1.1 USB · network Direct control
Carbide 3D Shapeoko 3 XXL 838 × 838 mm GRBL 1.1 USB · network Direct control
Carbide 3D Shapeoko 4 Standard 444 × 444 mm GRBL 1.1 USB · network Direct control
Carbide 3D Shapeoko 4 XL 838 × 444 mm GRBL 1.1 USB · network Direct control
Carbide 3D Shapeoko 4 XXL 838 × 838 mm GRBL 1.1 USB · network Direct control
Carbide 3D Shapeoko 5 Pro 2×2 623 × 623 mm GRBL 1.1 USB · network Direct control
Carbide 3D Shapeoko 5 Pro 4×2 1,237 × 623 mm GRBL 1.1 USB · network Direct control
Carbide 3D Shapeoko 5 Pro 4×4 1,237 × 1,237 mm GRBL 1.1 USB · network Direct control
Carbide 3D Shapeoko HDM 690 × 610 mm GRBL 1.1 USB · network Direct control

FoxAlien machines

7 machines

Model Work area Controller Link Support
FoxAlien 4040-XE 400 × 400 mm GRBL 1.1 USB · network Direct control
FoxAlien Masuter 3 400 × 400 mm GRBL 1.1 USB · network Direct control
FoxAlien Masuter 3S 400 × 400 mm GRBL 1.1 USB · network Direct control
FoxAlien Masuter Pro 380 × 380 mm GRBL 1.1 USB · network Direct control
FoxAlien Vasto 400 × 400 mm GRBL 1.1 USB · network Direct control
FoxAlien XE-PRO 4040 400 × 400 mm GRBL 1.1 USB · network Direct control
FoxAlien XE-PRO 8040 800 × 400 mm GRBL 1.1 USB · network Direct control

Genmitsu machines

7 machines

Model Work area Controller Link Support
Genmitsu 3018-PRO 300 × 180 mm GRBL 1.1 USB · network Direct control
Genmitsu 3018-PROVer V2 290 × 180 mm GRBL 1.1 USB · network Direct control
Genmitsu 3020-PRO MAX V2 300 × 205 mm GRBL 1.1 USB · network Direct control
Genmitsu 4040 Reno 400 × 400 mm GRBL 1.1 USB · network Direct control
Genmitsu 4040-PRO 400 × 400 mm GRBL 1.1 USB · network Direct control
Genmitsu 4040-PRO MAX 400 × 400 mm GRBL 1.1 USB · network Direct control
Genmitsu PROVerXL 4030 V2 400 × 300 mm GRBL 1.1 USB · network Direct control

Inventables machines

4 machines

Model Work area Controller Link Support
Inventables X-Carve 1000 mm 749 × 749 mm GRBL 1.1 USB · network Direct control
Inventables X-Carve 500 mm 300 × 300 mm GRBL 1.1 USB · network Direct control
Inventables X-Carve Pro 4×2 1,219 × 610 mm GRBL 1.1 USB · network Direct control
Inventables X-Carve Pro 4×4 1,219 × 1,219 mm GRBL 1.1 USB · network Direct control

MillRight CNC machines

8 machines

Model Work area Controller Link Support
MillRight CNC Carve King 2 438 × 438 mm GRBL 1.1 USB · network Direct control
MillRight CNC M3 260 × 260 mm GRBL 1.1 USB · network Direct control
MillRight CNC Mega V 2 Full Sheet 2,464 × 1,270 mm GRBL 1.1 USB · network Direct control
MillRight CNC Mega V 2 Standard 483 × 483 mm GRBL 1.1 USB · network Direct control
MillRight CNC Mega V 2 XL 889 × 889 mm GRBL 1.1 USB · network Direct control
MillRight CNC Mega V 2 XXL 1,270 × 1,270 mm GRBL 1.1 USB · network Direct control
MillRight CNC Power Route Max 1,275 × 1,275 mm GRBL 1.1 USB · network Direct control
MillRight CNC Power Route Plus 630 × 630 mm GRBL 1.1 USB · network Direct control

Ooznest machines

6 machines

WorkBee machines with a Duet 2 board running RepRapFirmware. Dusty drives them through its own bridge, new and tried on virtual boards so far; it can also save their G-code in the Duet flavor.

Model Work area Controller Link Support
Ooznest WorkBee Z1+ 1000×1000 770 × 770 mm Duet (RepRapFirmware) Network · USB New bridge
Ooznest WorkBee Z1+ 1000×1500 770 × 1,270 mm Duet (RepRapFirmware) Network · USB New bridge
Ooznest WorkBee Z1+ 1500×1500 1,270 × 1,270 mm Duet (RepRapFirmware) Network · USB New bridge
Ooznest WorkBee Z1+ 500×500 270 × 270 mm Duet (RepRapFirmware) Network · USB New bridge
Ooznest WorkBee Z1+ 750×1000 520 × 770 mm Duet (RepRapFirmware) Network · USB New bridge
Ooznest WorkBee Z1+ 750×750 520 × 520 mm Duet (RepRapFirmware) Network · USB New bridge

OpenBuilds machines

4 machines

Model Work area Controller Link Support
OpenBuilds C-Beam Machine 350 × 280 mm grblHAL USB · network Direct control
OpenBuilds LEAD CNC 1010 730 × 810 mm grblHAL USB · network Direct control
OpenBuilds LEAD CNC 1515 1,170 × 1,250 mm grblHAL USB · network Direct control
OpenBuilds MiniMill 120 × 180 mm grblHAL USB · network Direct control

Sienci Labs machines

14 machines

LongMill and AltMill: the grblHAL boards (SuperLongBoard) and the older GRBL boards each have their line.

Model Work area Controller Link Support
Sienci Labs AltMill 2×4 1,265 × 635 mm grblHAL USB · network Direct control
Sienci Labs AltMill 4×4 1,265 × 1,251 mm grblHAL USB · network Direct control
Sienci Labs LongMill MK1 12×12 285 × 320 mm GRBL 1.1 USB · network Direct control
Sienci Labs LongMill MK1 12×30 770 × 320 mm GRBL 1.1 USB · network Direct control
Sienci Labs LongMill MK1 30×30 770 × 820 mm GRBL 1.1 USB · network Direct control
Sienci Labs LongMill MK1 48×30 1,230 × 820 mm GRBL 1.1 USB · network Direct control
Sienci Labs LongMill MK2 12×30 810 × 355 mm GRBL 1.1 USB · network Direct control
Sienci Labs LongMill MK2 30×30 810 × 855 mm GRBL 1.1 USB · network Direct control
Sienci Labs LongMill MK2 48×30 1,270 × 855 mm GRBL 1.1 USB · network Direct control
Sienci Labs LongMill MK2.5 12×30 810 × 355 mm grblHAL USB · network Direct control
Sienci Labs LongMill MK2.5 30×30 810 × 855 mm grblHAL USB · network Direct control
Sienci Labs LongMill MK2.5 48×30 1,270 × 855 mm grblHAL USB · network Direct control
Sienci Labs LongMill MK3 30×30 813 × 813 mm grblHAL USB · network Direct control
Sienci Labs LongMill MK3 48×30 1,245 × 813 mm grblHAL USB · network Direct control

Snapmaker machines

5 machines

The Snapmaker 2.0 with its CNC module runs Marlin. Dusty drives them through its own bridge, new and tried on virtual boards so far; it can also save their G-code in the Marlin flavor.

Model Work area Controller Link Support
Snapmaker Snapmaker 2.0 A150 (50 W CNC module) 145 × 148 mm Marlin Network · USB New bridge
Snapmaker Snapmaker 2.0 A250 (200 W CNC module) 230 × 225 mm Marlin Network · USB New bridge
Snapmaker Snapmaker 2.0 A250 (50 W CNC module) 230 × 238 mm Marlin Network · USB New bridge
Snapmaker Snapmaker 2.0 A350 (200 W CNC module) 320 × 325 mm Marlin Network · USB New bridge
Snapmaker Snapmaker 2.0 A350 (50 W CNC module) 320 × 335 mm Marlin Network · USB New bridge

Generic machines

1 machine

The usual 3018-type desktop CNCs (GRBL 1.1 board over USB, 775 motor): check the travel and the speeds on your own machine.

Model Work area Controller Link Support
CNC 3018 300 × 180 mm GRBL 1.1 USB · network Direct control

Your CNC is not in the list?

The list only covers ready-made profiles. Beyond that, the controller decides: here are three ways to set up your machine.

01

Find My Machine

Plug it in: Dusty tries the USB ports and looks for Dusty Link on the network, reads the controller without moving anything, and offers the matching models.

02

My Machine Is Not Listed

The assistant gives a GRBL profile to set up: enter the travel, the corner of the origin and the spindle — that is all a machine outside the catalog needs.

03

Import a profile

A profile exported from another Dusty, or a starter package, brings back your machines and settings on Mac, iPad, Windows and Linux.

By controller

Driven directly

  • GRBL 1.1, grblHAL, FluidNC and their variants
  • Over USB (Mac, Windows, Linux)
  • Over the network, Telnet (Mac, iPad, iPhone, Windows, Linux)
  • Through Dusty Link, from every device

G-code for your controller

  • Mach3 / Mach4, LinuxCNC, UCCNC, MASSO, Centroid
  • Duet, Marlin, Smoothieware, GRBL-STM
  • Custom start, end and tool change blocks
  • Save the file, send it with their own software

Controllers, connection and machine control

Compatibility questions

How do I know if my CNC works with Dusty?

Look for it in the list above. If it is not there, check its controller in the documentation or on the board: GRBL 1.1, grblHAL and FluidNC are driven directly. For other controllers, Dusty saves the G-code in their flavor.

Does Dusty work with a 3018 CNC?

Yes: the 3018 CNC (GRBL 1.1, over USB) is the preset machine of the tour, and the eight example projects are made for it.

Does Dusty work with Mach3 or LinuxCNC machines?

Dusty does not drive them, but it saves the G-code in the Mach3 / Mach4 or LinuxCNC flavor (and UCCNC, MASSO, Centroid): open it in their own software.

Can I drive a USB CNC from an iPad?

The iPad has no serial port: it drives a CNC on the network (Wi-Fi or Ethernet), or a USB CNC through Dusty Link on a Raspberry Pi or a PC.

Why does my machine have a different work area?

The travel changes with extension kits, spoilboards and spindles. Check the profile against your machine; Dusty reads the controller settings when you connect.

How do I ask for a machine to be added?

Tell us the model on the ideas page. The catalog grows with each version of Dusty.

Try it with your CNC.

Dusty is free, with no account. Install it, plug in the machine, and the tour does the rest — or try everything on the virtual CNC first.