Skip to content

Dusty Manual

Dusty Link and Hub mode

Share a USB CNC on the workshop network from a Raspberry Pi, an old PC or the desktop app in Hub mode, and drive it from an iPad, another computer or a phone.

Dusty Link shares a CNC machine on the workshop’s local network: it stays plugged over USB into a computer next to it, and the other devices drive it — Dusty Studio in a browser, the iPad or Mac app, another desktop app. Two forms, the same thing for the devices that join:

  • Headless Dusty Link: a small service on a Raspberry Pi, another ARM board or an old PC (Linux or Windows), with no interface. It also serves Dusty Studio: a browser on the network opens its address and drives the machine, with nothing to install. See Installing Dusty Link.
  • Desktop app Hub mode: the Windows or Linux computer connected to the CNC lends it to the other devices, while keeping it on its own screen. See Desktop app Hub mode.

Control goes through the same core as on the device connected to the machine: same pre-send checks, same incident cards, same tool change prompt, same safeguards. Nothing comes from the Internet: Dusty Link only accepts local network addresses.

In this section

  • Installing Dusty Link

    Install the Dusty Link service on a Raspberry Pi or a Linux PC with one command line, or on Windows, with its options, pairing code and 3D printer safeguard.

  • Joining a shared machine

    Connect to a machine shared by Dusty Link from the desktop app, the iPad or the page Dusty Link serves, with the address and pairing code kept for next time.

  • Mobile pendant

    Drive the shared machine from a phone next to it, with nothing to install: scan a QR code, jog, set zeros, probe, start, pause and STOP from the browser.

  • Job queue and confirmation

    How jobs sent to Dusty Link wait in a queue and start only after a confirmation on the device that sent them, and what other devices can do meanwhile.

  • Remote tool change, pause and stop

    Tool changes, pause with retract and stops on a shared machine: the prompt shows on every device, and STOP is always allowed from any paired device.

  • Desktop app Hub mode

    Lend the machine connected to a Windows or Linux computer to the other devices on the network, while keeping control on its own screen.

  • Dusty Link security

    What protects a shared machine: local network only, a pairing code on every request, confirmation on the sending device, STOP always allowed, no-go zones applied.

  • The dusty command and automation

    The dusty command shipped with Dusty Link checks, estimates and exports projects from a terminal and queues them on the machine, starting only after an explicit answer.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.