Dusty Link and Hub mode
Desktop app Hub mode
Lend the machine connected to a Windows or Linux computer to the other devices on the network, while keeping control on its own screen.
In the desktop app, Machine tab, check Share this machine on the network (Hub mode) (off by default). Sharing starts when the machine is connected (USB, network or virtual CNC) and stops with the app. The section shows:
- the pairing code (kept from one launch to the next; New Code changes it);
- the addresses to open in a browser on the other devices (Dusty Studio is served by the app);
- the mobile pendant: its address and its QR code, to scan with a phone (see Mobile pendant);
- the connected devices, the queue (with Remove) and the activity (requests, confirmations, pauses, stops, job ends).
.dusty projects sent by the dusty command or by a script are prepared here, for the connected machine, as on headless Dusty Link: same pre-flight check (no-go zones included), work zero read on the machine, G-code in its flavor. The job waits in the queue: nothing starts on its own. The preparation runs in the app, even with its window minimized.
You stay in control: your own commands do not go through the sharing, STOP and pause stay on your screen, and a job started here belongs to you (the other devices can only pause or stop it). The machine profile is set on this computer. Windows asks to allow the app on the private network the first time it shares.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.