Skip to content

Dusty Manual

Editing and arranging

Select, align, combine, offset, warp, repeat and nest shapes, clean up imported paths, and trace images into shapes ready for machining.

In this section

  • Selection and inspector

    Select shapes by click, box or Tab, set position, size and rotation in the Shapes panel, and select open shapes, inner shapes or circles by diameter.

  • Undo history

    A list of every action in the project — drawing, operations, settings, notes, pages: choose a step to go back to it, then keep that state or cancel.

  • Calculations in fields

    Type a calculation in any number field: arithmetic, units converted on the fly such as 3/4" or 1ft 6in, and percentages of the current value.

  • Arranging

    Group, lock, align, distribute, place on the stock, dock, move together, same size, rotate by steps or by two points, shear, mirror and drawing order.

  • Shape operations

    Union, subtract, intersect, weld and cut with a shape, the Boolean assistant and its five results, convert to path, break apart and rubber-band outline.

  • Offset

    Create an outline at a constant distance — outward, inward or both — with round, sharp or bevel corners, previewed in pink, then repeat it in one command.

  • Optimize shapes

    Rebuild imported or traced paths with fewer nodes within a tolerance: smooth curves, fit to straight lines, or fit to arcs that reach the G-code as G2 and G3.

  • Warp

    Stretch a selection by its four corners for perspective effects, or reshape it freely with a 4 × 4 grid of handles, with symmetric moves if you like.

  • Resize slots

    Adapt the slots, mortises and tabs of a joint to another material thickness, or bring them back to size after scaling the drawing, with a pink preview.

  • Arrays

    Repeat a selection in a grid or around a circle: spacing, staggered rows, mirrors, random orientation from a seed, copied operations and numbered copies.

  • Virtual arrays

    Clones linked to their originals: change one part and the whole sheet follows; clones are machined like the originals, and the array can be edited or flattened.

  • Copy along a path

    Repeat objects along a line, a curve or around a shape: by number or spacing, rotated with the path, with a progressive size and copied operations.

  • Nesting

    Arrange parts to save material, on one sheet or several: quick bounding-box or true-shape nesting, spacing for the bit, allowed rotations and material use.

  • Cleaning up paths

    Put imported drawings in order: close paths with a tolerance, join touching paths, delete duplicates and find the open shapes a pocket would ignore.

  • Tracing an image

    Turn the dark areas of a PNG or JPEG into shapes: brightness thresholds, transparency, sketch mode for uneven light, speck removal, smoothing and center line.

  • Center line and one-pass engraving

    Trace a line down the middle of each stroke instead of its outline, then engrave it in one pass with a bit of the stroke width, or a V-bit at the right depth.

  • Images and masks

    Imported images are models to trace, never machined: adjust gamma, contrast and edges to trace them better, reload a retouched file or replace the image.

  • Image masks

    Keep only part of an image visible with closed shapes: crop it, remove its center, edit or flatten the mask, then trace only the visible part.

  • 3D models and depth maps

    Import an STL, OBJ, 3MF, AMF, PLY or OFF model and turn it into a 16-bit depth map: orient it, size it to the stock, insert it, edit it later.

  • Depth map settings

    Resolution, 8 or 16 bits, transparent background, inversion, equalization, depth cutoff and outline of the depth map made from a 3D model, then editable or frozen.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.