Skip to content

Editing and arranging

Arranging

Group, lock, align, distribute, place on the stock, dock, move together, same size, rotate by steps or by two points, shear, mirror and drawing order.

The Arrange menu and the Arrange button of the toolbar offer:

  • Group (⌘G), Ungroup (⇧⌘G) and Auto-Group: each selected closed shape is grouped with the shapes it contains (a part and its holes become one);
  • Lock (⌘L) and Unlock (⌥⌘L);
  • Align (at least two shapes; the reference is the last shape selected, Shift-clicked last): left edges (⌃⌘←), horizontal centers, right edges (⌃⌘→), top edges (⌃⌘↑), vertical centers, bottom edges (⌃⌘↓);
  • Distribute (at least three shapes): centers or equal spacing, horizontally or vertically;
  • Place on Stock: the four corners, the middles of the four sides, or the center (⌃⌘C);
  • Dock left, right, up or down (⌃⇧⌘ and an arrow; also in the Shapes panel): each shape slides until the first shape in its way or the edge of the stock; a shape lying inside another one does not stop at its inner edge. Options, below the buttons of the Shapes panel (padding and inner objects are shared with nesting):
    • Padding: gap left against the obstacle or the edge; a shape already closer does not move back (dock one way, then the other, to even out the gaps);
    • Move as group: the whole selection stops at the first obstacle, its shapes keep their spacing (a group always moves as a whole);
    • Lock inner objects: a shape lying inside another one moves with it, grouped or not; otherwise it slides on to the first obstacle;
  • Move Together horizontally (⌃⇧⌘H) or vertically (⌃⇧⌘V): the shapes come edge to edge, without gaps, in their order; the first one does not move;
  • Same Size: same width or same height as the last shape selected, around the center of each shape; with Keep Proportions, the other dimension follows in the same ratio;
  • Rotate by 90° (⌥⌘← and ⌥⌘→), 45° (⌃⌥⌘← and ⌃⌥⌘→), 15° (⌥⇧⌘← and ⌥⇧⌘→) or 1.5° (⌃⌥⇧⌘← and ⌃⌥⇧⌘→), left or right; in Dusty Studio and the desktop app, Ctrl+← and Ctrl+→ (1.5°), Ctrl+Shift+← and Ctrl+Shift+→ (45°), “,” and “.” (90°); By Two Points: click the pivot, then a reference point of the selection, then its new place (the status bar guides the clicks, Escape cancels); Rotate and Scale by Two Points also enlarges or shrinks the selection to bring the reference point exactly to its new place; holding Shift on the third click switches from one to the other;
  • Shear…: shears the selection around its center by a horizontal angle (the vertical sides lean) and a vertical angle (the horizontal sides lean); with the mouse, see the shear handles in Rulers, guides and display;
  • Flip Horizontally (⇧⌘H), Flip Vertically (⇧⌘V), Mirror Across Line… (⇧⌘M): the open line selected last is the axis and stays in place; the sheet shows the reflection in pink, then adds a mirrored copy (the original stays; its operations are copied if you ask) or flips the shapes;
  • Grid Array… and Circular Array…: see Arrays;
  • Nest…: see Nesting;
  • drawing order: Bring to Front (⇧⌘]), Bring Forward (⌘]), Send Backward (⌘[), Send to Back (⇧⌘[).

On the canvas, with the Selection tool and a selection: A aligns it to the hovered segment of one of its shapes (see Editing nodes); , and . rotate it 90° left and right; Shift+L, Shift+R, Shift+T and Shift+B align the left, right, top and bottom edges, Shift+C and Shift+E the centers (on one vertical line, on one horizontal line), Shift+P moves the selection to the center of the stock. Letters on their own still choose the tools.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.