Skip to content

Editing and arranging

Offset

Create an outline at a constant distance — outward, inward or both — with round, sharp or bevel corners, previewed in pink, then repeat it in one command.

Drawing › Offset… (⌥⌘O) creates an outline at a constant distance from the selected shapes: a border around a text, a cut line around an engraving, an inner frame. The sheet opens at the edge of the canvas, which stays visible: the result is drawn in pink at each change, before you confirm.

  • Distance;
  • Direction: outward, inward, or both sides (two outlines); an open path is surrounded by an outline at the chosen distance on both sides;
  • Corners: round, sharp or bevel (only the corners pointing in the direction of the offset change);
  • Replace the original shapes: the offset takes their place and joins their operations; otherwise it is added next to them;
  • Outer outlines only: holes and outlines lying inside another outline of the result are left out;
  • Group the result;
  • Simplify the result: the outlines are rebuilt as smooth curves, with far fewer nodes (0.05 mm deviation at most);
  • Select the result (checked by default): otherwise the selection stays on the original shapes.

Offset creates the result in a single undoable action; Cancel or Escape closes the sheet without changing anything.

Drawing › Repeat Last Offset (⌃⌥⌘O; also in the context menu) offsets the selection with the settings of the last offset made since Dusty was opened, without opening the sheet: handy to give several parts the same outline one after the other. The command stays dimmed until an offset has been made. In Dusty Studio it has no default shortcut: pick one in the shortcut editor. Difference from MillMage: there is no ⌘-click on an Offset button (Dusty has none); the menu and the shortcut replace it, on iPad too.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.