Skip to content

Editing and arranging

Nesting

Arrange parts to save material, on one sheet or several: quick bounding-box or true-shape nesting, spacing for the bit, allowed rotations and material use.

Arrange › Nest… (also below the Dock buttons of the Shapes panel) arranges the selected parts to save material, on one sheet or several. The sheet opens at the edge of the canvas; while it computes, the best layout found is drawn there in pink (the next pages to the right of the container).

  • Mode: Quick (bounding boxes) arranges the rectangles around the parts (quarter turns allowed), in an instant; True shape follows the outline of the parts — a part fits into the hollow of another (an L, a letter) — and looks for better layouts during the optimization time.
  • Container: the page stock, or the selected shape: the largest closed shape in the selection (by its area); in quick mode it must be an axis-aligned rectangle. Unselected shapes lying in the container are avoided.
  • Spacing: between parts (at least the bit diameter if the parts are cut out: a profile runs between two parts) and from the container edge.
  • Lock inner objects: a shape lying inside another one (a hole, an engraved detail) moves with it, grouped or not; otherwise it is nested on its own. Holes in the parts do not receive other parts.
  • Lock rotation: no rotation (wood grain); otherwise quarter turns in quick mode and, in true shape, the allowed orientations (every 1°, 2°, 3°, 5°, 10°, 15°, 30° or 45°, quarter turns, half turns).
  • Multiple pages: what does not fit goes onto new pages, created right after the open page with its settings, a copy of the container (when it is a shape of the drawing), their parts in place and the operations of those parts; without the option, what does not fit stays in place.

The summary gives the number of parts and the size of the container, and warns: degenerate shapes (zero length or area) and locked parts left in place (a locked part is avoided like an obstacle), parts too large for the container in all their allowed orientations. Nesting is refused without parts, without a container, or with a rotated container (or one that is not a rectangle) in quick mode.

Nest starts the computation; the parts placed, the pages, the material use (area of the placed parts over the container area times the number of pages) and the number of trials are shown. In true shape, Stop applies the best layout found, Next Page (multiple pages) freezes the current page and goes on with the remaining parts on the next ones; when the chosen time is up, the best layout is applied. Cancel changes nothing. The result is a single undoable action (⌘Z), created pages included; it is not applied if the drawing changed during the computation.

Parts start from the corner of the project origin and fill the short side of the container first, moving along the long side as little as possible: the offcut stays in one piece, at the end. The same selection with the same settings gives the same layout. True shape follows the parts on a fine grid (1/720 of the container’s long side, 0.1 mm at best): the gaps you get are slightly larger than the spacing asked for, never smaller. In Dusty Studio and the desktop app, the computation runs in short slices so the page stays usable.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.