Skip to content

Editing and arranging

Selection and inspector

Select shapes by click, box or Tab, set position, size and rotation in the Shapes panel, and select open shapes, inner shapes or circles by diameter.

With the Selection tool: a click chooses a shape, Shift or ⌘ adds or removes, a dragged box chooses everything it touches; Tab moves to the next shape (Shift+Tab: previous); Escape deselects. The arrow keys move the selection by 1 mm (Shift: 10 mm, ⌥: 0.1 mm; adjustable). Delete removes it.

The Shapes panel of the inspector sets the selection precisely:

  • Reference point: the point of the selection (corner, middle of an edge or center) whose X and Y are shown;
  • X, Y (measured from the project origin), Width, Height, Keep proportions;
  • Rotate by: an angle in degrees, applied when you confirm it;
  • depending on the shape: Corner radius (rectangle), Sides, Inner radius and Secondary points (polygon and star, see Drawing tools), text settings;
  • Locked: a locked shape can no longer be moved, resized or rotated;
  • Paint colors: see Paint colors.

Editing: cut (⌘X), copy (⌘C), paste (⌘V), paste in place (⌥⌘V, at the same position), duplicate (⌘D), duplicate with operations (⇧⌘D: the copies join the operations of their originals), delete, select all (⌘A), invert selection (⇧⌘I). The shape clipboard belongs to Dusty. The Edit › Select submenu chooses:

  • the open shapes of the drawing (those a pocket refuses);
  • the shapes inside the selection (holes and details inside the selected closed shapes);
  • the shapes smaller than the selection (for example all the small holes of an imported drawing: select the largest of them);
  • circles by diameter…: drawn circles and imported circular outlines between a minimum and a maximum diameter, for example all the holes of one drilling.

Shapes inside, smaller shapes and circles are only looked for among visible, unlocked shapes.

Right-clicking the canvas (long press on iPad) offers the editing commands, lock, drawing order, New Operation on the selection and assignment to the selected operation; outside the shapes: select all, invert selection, select open shapes.

Undo (⌘Z) and Redo (⇧⌘Z) cover both the drawing and the operations, in the order you made the changes.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.