Editing and arranging
Optimize shapes
Rebuild imported or traced paths with fewer nodes within a tolerance: smooth curves, fit to straight lines, or fit to arcs that reach the G-code as G2 and G3.
Drawing › Optimize Shapes… (⌥⇧⌘O) rebuilds the selected paths (or the whole drawing without a selection) with fewer nodes, never straying from the original by more than the tolerance; useful after a DXF import or a trace:
- Smooth shapes: smooth curves, wobbles and jagged edges softened;
- Fit to lines: runs of small, nearly aligned segments become true straight lines;
- Fit to arcs: circular arcs and straight lines, for smoother moves and for the Radius tool. The arcs reach the G-code as true arcs (
G2,G3): see Arcs in the G-code.
The optimized paths and their nodes are drawn in pink; the counters give the number of nodes before and after. Rectangles, ellipses, texts and images are left alone. Optimize applies it all in a single undoable action.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.