Editing and arranging
Cleaning up paths
Put imported drawings in order: close paths with a tolerance, join touching paths, delete duplicates and find the open shapes a pocket would ignore.
Imported drawings (DXF above all) often arrive as separate segments, nearly closed paths or overlapping shapes. The Edit menu (and the Shapes button of the toolbar) puts them in order:
- Close Path: joins the two ends of each selected open path with a segment, whatever their distance; with the Edit Nodes tool, closes the path being edited;
- Close Paths with Tolerance…: closes the open paths of the selection (or of the whole drawing without a selection) whose ends are closer than the tolerance (0.5 mm suggested), with a segment, or by moving the ends together halfway; the window counts the open paths and those that will be closed;
- Join Paths (⌘J): joins into one path the selected open paths whose ends touch (within 0.1 mm);
- Delete Duplicates (⌥⇧⌘D): removes identical overlapping shapes (same color, same path), in the selection or in the whole drawing; the first copy stays;
- Reverse Direction: cutting direction of the selected shapes, see Start point and direction.
To find the paths left open: Edit › Select › Open Shapes; Open Shapes of Pockets keeps only those that a pocket (or another operation that needs closed shapes) would ignore.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.