Editing and arranging
Resize slots
Adapt the slots, mortises and tabs of a joint to another material thickness, or bring them back to size after scaling the drawing, with a pink preview.
Drawing › Resize Slots… (MillMage’s “Resize Slots”) adapts the slots (halved joints, dados) and tabs (tenons, box fingers) of the selected shapes to another material thickness, or brings them back to size after scaling the whole drawing. It is a different tool from the machining tabs.
First measure the current length of a slot or a tab with the Measure tool, then set:
- Old Thickness: length of the slots or tabs to recognize; Tolerance: allowed deviation around it (variations in the drawing, kerf compensation already drawn); New Thickness: the length you want;
- Adjust Slot Depth: the bottom of the slots moves, the outer size of the assembly does not change;
- Adjust Slot Width: both sides of the slots move apart or closer symmetrically (dividers crossing in the middle of a part, like the compartments of a tray); Dusty also widens mortises (rectangular holes in the part, even drawn separately), which MillMage does not;
- Adjust Tab Height: the top of the tabs moves, the inner dimensions of the assembly do not change.
A slot is a recess of three straight sides (two parallel sides, a bottom perpendicular to them) that opens on an edge of the part; its depth is the length of its shorter side, its width that of its bottom. A tab sticks out of the part from a shoulder; its height is the length of its shorter side (a lone rectangle is not a tab). The result is drawn in pink at each change, with the moved nodes, and the sheet counts the slots and tabs found. Apply makes the change (one undoable action) and leaves the sheet open, OK makes it and closes the sheet, Cancel closes it without doing anything more (what was applied is undone with ⌘Z).
Conditions, as in MillMage: sharp corners and straight segments only (first remove fillets with the Radius tool); an extra node in the middle of a side, or a “curve” that is not straight, prevents the slot from being recognized: Optimize shapes › Fit to lines repairs them. Only paths are changed (convert rectangles and polygons first); members of groups are handled like the other shapes.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.