Skip to content

Drawing

Radius, notches and dogbones

The Radius tool rounds corners, cuts notches and adds dogbones or T-bones so that square parts fit; one command adds dogbones to every inside corner.

The Radius tool is at the end of the node bar: a radius field (project unit), the Round or Notch Corners button, which applies it to the chosen corners (nodes between two straight segments; Return in the field does the same), and the Dogbone Style menu.

  • Positive radius: fillet, an arc tangent to both segments (reduced if the segments are too short).
  • Negative radius: a notch cut into the material. On an inside corner — where a round cutter always leaves a radius: the bottom of a slot, the corner of a mortise, of a hole or of a pocket —, it is a dogbone: a circle of the given radius through the corner, so that a part with sharp corners (tenon, box panel) fits all the way in. On an outside corner, it is an inverted fillet, a quarter circle centered on the corner.
  • Zero radius on the two nodes on either side of a fillet or a notch (clicking one of its arcs is enough to choose them): the sharp corner comes back. With another radius, the fillet or the notch is redone at that radius.

Remove or change a radius (like MillMage’s “Remove or Change a Radius”): click the arc of a fillet or a notch, then the Remove Fillet button (next to the dogbone style): the sharp corner comes back at the intersection of the two neighboring segments, and it stays chosen, ready for another radius. The button’s tooltip gives the radius of the chosen fillet when it is a circular arc. This also works on the rounded corners of a rectangle (it becomes a path) and on imported arcs made of several curves; an arc imported as a series of short straight segments must first be rebuilt as an arc with Optimize shapes › Fit to arcs.

Dogbone styles, as for the dogbone slot: Diagonal Dogbone (the circle is centered on the bisector of the corner: the least material removed), Inline T-Bone (centered on the shorter of the two sides: the notch extends a slot lengthwise) or T-Bone on the Long Side (centered on the longer one: the notch stays hidden on the side).

Material side

A closed outline is solid, unless it is a hole, i.e. inside an odd number of other outlines (a mortise in a panel, even drawn separately), or unless an operation says so: a pocket, a rest pocket, a dogbone slot or an inside profile clear its inside, an outside profile keeps it solid. Shapes on the T1 and T2 tool layers do not count.

Dogbones on Inside Corners (Drawing menu, and Shapes menu of the toolbar): adds in one go a dogbone to every inside corner of the selected shapes, for example all the panels of a box and their mortises. The suggested radius is that of the tool of the operation that machines these shapes, otherwise of the tool chosen in the tool list (Studio: the first end mill of the project): a 3.175 mm end mill gives a 1.5875 mm dogbone, the cutter radius being the smallest that fits. Corners that are already rounded or notched do not change; a corner whose sides are too short for the radius stays sharp (Dusty says so). A single undoable action.

Negative corner radius of a rectangle (Shapes panel): each corner gets a notch, a dogbone if the rectangle is a hole or a pocket, an inverted fillet if it is solid; the rectangle becomes a path (it loses its rectangle Width and Height fields) and the notch is limited so that all four fit.

Without changing the drawing, the Dogbone slot operation also clears the corners of a rectangular slot.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.