Skip to content

Machining operations

Dogbone slot

Clear a rectangle and cut a round relief into its four corners, so that a square-cornered tenon or panel fits, without changing the drawing.

The dogbone slot clears a rectangle and cuts a round relief of the tool diameter into its four corners, so that a square-cornered part (tenon, panel, half-lap joint) fits despite the bit’s radius. The drawing is not changed: only the toolpaths are. Tool: end mill.

  • Accepted shapes: rectangles (even rotated) whose long side exceeds the short side by at least 1 mm; the others are left out with a warning.
  • Relief style: Inline (the relief extends the slot lengthwise), On the long sides, Minimal (on the diagonal, the least material removed).
  • The other settings are those of the pocket.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.