Skip to content

Machining operations

Profile

Follow the outline of shapes to cut out a part or engrave a line: outside, inside or along the line, stock to leave, pass order, trochoidal path and entries.

Follows the outline of the shapes, to cut out a part or engrave a line. Tools: end mill, ball mill, V-bit, round-over, scribe.

  • Side: Outside (the part keeps its size, the tool runs outside), Inside (for an opening), Along line (the tool center follows the path, open shapes included).
  • Nested closed shapes are read as a part and its holes: with Outside, the part’s outline is machined outside and its holes inside. Two parts closer than the tool diameter are cut around together.
  • Stock to leave (Outside and Inside): material left for a finishing pass.
  • Passes: all passes of an outline are done before moving to the next; inner outlines before those around them (the part stays held), then the nearest. On an open shape, every other pass runs the other way.
  • Tool path: Direct, or trochoidal to spare the spindle (see Trochoidal path).
  • Entry: plunge, zigzag ramp, spiral, or helical with the trochoidal path (see Entering the material).

Dusty warns about a profile that cuts through the stock without tabs (the part will come free and may be thrown) and about tabs too short or too thin to hold.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.