Machining operations
V-carving
Carve grooves of varying width with a V-bit, the depth following the medial axis of the shapes: maximum depth with a flat bottom, passes and open shapes.
Carves grooves of varying width with a V-bit (or a ball mill): the depth follows the medial axis of the shapes, so that the flanks of the bit touch both edges exactly. Ideal for lettering and fine patterns. Dusty uses the included angle and the tip radius of the tool: enter them carefully.
- Limit maximum depth (checked by default) and Maximum depth: where the shape is wider than that depth allows, the bottom is cleared flat at that depth, at the stepover; check Finish stepover to go over it a second time with a finer step (fewer ridges at the bottom). The depth never exceeds the cutting part of the bit.
- Depth per pass: the tip goes down at most this much at each pass.
- Start depth: shifts the whole carving down.
- Open shapes: Dusty carves a “valley” groove along the path, at the maximum depth (or the whole cutting part of the bit), back and forth.
Letters are carved one after another, the nearest first. A text of several hundred characters is computed in one or two seconds.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.