Skip to content

Machining operations

Rest pocket

Take up with a smaller tool what a large bit could not reach — tight corners and narrow passages — on the same shapes, after the first pocket.

Takes up, with a smaller tool, what a pocket cut with a large tool could not reach: tight corners, narrow passages. Create the pocket with the large bit, then a rest pocket on the same shapes with the small one, placed after it in the list.

  • Clearing tool diameter: the diameter of the large bit (6 mm by default).
  • The other settings are those of the pocket. The small tool only goes where material remains, overlapping the cleared area slightly.
  • The two operations use two tools: a tool change is inserted between them.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.