Machining operations
Creating an operation
Select shapes, add an operation and set it in the Operations panel: tool, color, machined shapes, output, the Problems section and the right-click commands.
- Select the shapes to machine.
- New Operation (toolbar, Operations menu, Operations panel or right-click on the canvas), then the type. The operation receives the selection and the first project tool that suits its type.
- Set it in the Operations panel: the list at the top (in machining order), the editor of the selected operation below. Its shapes are highlighted on the canvas, in its color.
Editor header:
- Name (empty: the type name), Mode (the type, fixed at creation), Color;
- Output enabled: a disabled operation stays in the project but is neither computed nor sent (also the checkbox in the Output column of the list);
- Tool: the project tools whose shape suits the type, or Tool from Library (copied into the project). Choosing a tool copies its feeds and speeds into the operation;
- Machine all shapes of its color: the shapes of the operation’s color are added automatically;
- Machined shapes and the buttons Assign selection (replaces its shapes), Add (⌘K), Remove (⇧⌘K), Select its shapes on the canvas.
At the bottom, the Problems section lists what prevents or hinders the computation: no tool, no shape, an open shape where closed shapes are needed, a depth beyond the stock… An operation to check shows an orange triangle in the list. The status bar counts the shapes used by no operation.
The columns of the list: Name (shapes and depth below), Mode, Tool, Vacuum (“On” when the operation turns the vacuum on) and Coolant (M7 mist, M8 flood, or a dash), Output. In Dusty Studio, vacuum and coolant are badges to the right of the name.
The Operations menu also offers Duplicate Operation, Delete Operation, Enable Only the Chosen Operation, Enable All Operations, Disable All Operations, the Tab Assistant… (see Tabs) and the Operations Library… (see Operations library).
Right-clicking an operation in the list (long press on iPad) gathers: enable or disable its output, enable only this operation (to preview or save a single operation), enable or disable all operations; assign, add or remove the selection, select its shapes; its tool, among the project tools that suit its type; move up, move down, duplicate, delete; the tab assistant. Each of these commands is undone with ⌘Z. Export This Operation… and Export the Operations Using the Same Tool… open the G-code saving for them only (see Saving the G-code). Save to Operations Library keeps it for other projects (see Operations library) and, for a pocket that ignores open shapes, Machine Open Shapes as a Profile hands them to a profile (see Open shapes: machining them as a profile).
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.