Skip to content

Machining operations

Pocket

Clear the inside of closed shapes down to the final depth, around islands: offset or raster pattern, stepover, stock to leave, entry and trochoidal path.

Clears the inside of closed shapes, down to the final depth. A shape inside another is an island: it is left standing. Tools: end mill or ball mill.

  • Clearing pattern: Offset (the default: from the center toward the wall, the finished wall last) or Raster (parallel zigzag lines, Raster angle 0° along X, 90° along Y, and an Outline pass before, after or none).
  • Stepover: distance between two passes, as a % of the diameter (40% by default) or as a length: the % or mm (in in inches) choice under the field also applies to tools and the library; the other value is shown (“i.e. 2.4 mm”). If it exceeds half the diameter, Dusty adds clean-up loops in the corners so that nothing is left.
  • Stock to leave on the walls and the islands.
  • Barcodes and QR: Module rows (the default) or Pocket the areas, for the codes assigned to the pocket (see Barcodes and QR codes).
  • Entry: plunge, zigzag ramp or helical; without room for the helix, a zigzag ramp.
  • Tool path: Direct, or trochoidal (see Trochoidal path).
  • Each separate area is cleared completely, all passes included, before the next one. Short links happen within the material already cleared; the others go through the pocket lift or the retract height.

Open shapes are ignored: the operation reports it (“open shape(s) ignored”) and Edit › Select › Open Shapes of Pockets selects them, so that you can close them (see Cleaning up paths); Machine Open Shapes as a Profile machines them on the line instead (see Open shapes: machining them as a profile).

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.