Skip to content

Machining operations

Chamfer

Cut a bevel along the edge of a closed outline with a V-bit, Dusty computing the depth from the requested width, outside or inside, with a tip offset.

Cuts a bevel along the edge of a closed outline, with a V-bit; the depth is computed to obtain the requested width.

  • Side: Outside (the shapes are the part: its outline and the rims of its holes are chamfered) or Inside (the shapes are openings).
  • Chamfer width, measured on the part from the path.
  • Tip offset and Measured from (Bit tip or Contact edge, the edge of the flat tip): offsetting the tip uses a higher part of the flank. For a pointed bit, both references are the same.
  • A width of more than half the tool diameter, or one that its cone cannot reach, is refused.
  • Passes and entries as for the profile.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.