Machining operations
Bore
Machine round holes larger than the tool by going down in a helix along the wall, then making a flat turn at the bottom; which shapes it accepts.
Machines round holes larger than the tool by going down in a helix along the wall, then making a flat turn at the bottom. Tool: end mill.
- Accepted shapes: circles (an ellipse with equal width and height, a circular path, a regular polygon with at least 16 sides). A square or a flattened ellipse is left out with a warning.
- Depth per revolution: descent at each turn of the helix (0.5 mm by default).
- Stock to leave, Cut direction.
- A hole smaller than the tool is refused; a hole of the tool’s diameter is drilled with a plunge; in a hole larger than two tool diameters, a central core remains (it falls if the hole goes through): a pocket would clear it.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.