Machining operations
Open shapes: machining them as a profile
A pocket and the other closed-shape operations ignore open paths: one command hands them to a profile on the line with the same settings, instead of closing them.
A pocket — like the rest pocket, the chamfer, the dogbone slot, the bore, surfacing and facing — only machines closed shapes: it ignores open shapes and reports it. Before closing paths whose ends are far apart (a drawing received from elsewhere, for example), consider whether a profile would suit better: it follows an open line very well, on the line.
In the operation editor (Open Shapes section) or by right-clicking it: Machine Open Shapes as a Profile. The open shapes go into a new profile on the line, placed just after, with the same depths, passes, feeds, cut direction, accessories and the same tool (if it suits a profile); the operation keeps its closed shapes. If it only machined open shapes, the profile replaces it (same name, same color, same output). It is a single action, undone with ⌘Z; check the result in the preview. Shapes coming from a color applied automatically stay in the operation, which still ignores them: remove that color from it if needed. To close the paths instead, see Cleaning up paths.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.