Machining operations
Drill
Drill a hole at the center of each shape by plunge, peck, spot or countersink, with simple moves rather than canned cycles that GRBL does not know.
Drills a hole at the center of each shape (two shapes with the same center give a single hole), going each time to the nearest hole. Tools: drill, end mill, V-bit. Dusty writes simple moves (no canned drilling cycles, which GRBL does not know).
- Drill type: Plunge (straight down, rapid up); Peck (successive descents of the depth per peck, a dwell at the bottom, a retract above the material or by a distance, at the retract rate); Spot (a starting point 0.5 mm below the surface, to guide a drill); Countersink (a conical seat for a screw head, see below).
- Depth measured from the tip (the default): unchecked, the depth is that of the full diameter and the tool goes further down by the height of its tip.
- Fields with no effect for the chosen type are grayed out: the final depth only serves plunge and peck drilling; spot drilling always starts from the surface.
- Only the plunge rate and the spindle speed are used.
Countersink
With a V-bit (or a drill), Dusty cuts a cone whose hole diameter is the one wanted at the start depth (the top of the part, by default). It derives the depth from the tool’s included angle: (hole diameter ÷ 2 − tip flat radius) ÷ tan(angle ÷ 2) — 4 mm for an 8 mm hole with a 90° V-bit. Below the hole diameter, the editor shows this countersink depth; the Depth column of the list shows it too. Choose a tool with the angle of the screw head (90° for most wood and metric screws). A diameter larger than the tool’s is brought back to it (warning). Drill the clearance hole before or after, with another drill operation.
For a hole larger than the tool, use boring.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.