Drawing
Measure and trim
Measure the distance and angle between two points, check whether a shape is closed, and trim an outline between its crossings, keeping a copy if needed.
- Measure (M): drag from one point to another (the points snap to shapes); the distance, the X and Y offsets and the angle are shown during the gesture. Nothing is added to the drawing. The status bar also tells whether the shape under the pointer (or at the end of the measurement) is closed or open: a pocket, or an inside or outside profile, needs a closed shape.
- Trim (X): click part of an outline; it is removed between the two intersections around it (with the shape itself or another one). An outline without intersections is removed entirely. The remaining pieces join the open paths they touch (⌘-click: without joining them); the curves of the trimmed outline are rebuilt as closely as possible. Shift-click keeps a copy of the removed segment, placed on the active color, for example to engrave it rather than lose it; if the active color is that of the trimmed shape, the status bar says so (choose another color to tell them apart). The two toggles Keep a Copy and Join the Pieces, at the top of the canvas with the Trim tool, do the same without a keyboard (iPad); Shift and ⌘ then reverse their setting.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.