Skip to content

The project

Cut order of repeats

Machine repeated parts operation by operation or part by part: how Dusty finds the parts, and why a tool change is never repeated.

When a sheet holds several similar parts (an array, copies along a path, the clones of a virtual array, nested parts), the project setup chooses the cut order:

  • Operation by operation (the default): each operation machines all its shapes before the next one, in the order of the operation list — for instance all the holes, then all the outlines. Within an operation, the shapes are taken nearest the tool first, and inner outlines before the one around them.
  • Part by part: the operations that follow one another with the same tool finish one part before moving on to the next — the holes then the outline of the first part, then those of the second… A part is a closed shape that lies in no other, with everything it contains; a shape outside any closed shape is a part of its own. Parts are taken nearest the tool first. A part that has been cut out is finished: if the job stops, the parts already made are complete.

A tool change is never repeated: operations with different tools are still machined one after the other, each on all its parts. Surfacing and facing, which work a whole area, are not split into parts. Part by part, the preview and the export by sequence show one section per part and per operation (“Profile — part 2 of 6”). This order is a Dusty proposal: MillMage machines operation by operation.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.