The project
Travel heights
Safe height, fast retract between shapes and pocket lift: their default values, what each one saves, and when to turn the fast retract off.
| Height | Default | Purpose |
|---|---|---|
| Safe height | 10 mm | Height of rapid moves above the stock surface. It must clear anything that sticks up: clamps, screws, hold-downs. |
| Fast retract between shapes | on, 2 mm | From one shape to the next within an operation, the tool only rises to this height above the stock, which saves time. Off, it rises to the safe height: turn it off if a screw or a clamp sticks up from the stock between the shapes. |
| Pocket lift | 0.5 mm | Inside a pocket, the tool moves from one point to another just above the floor already machined, instead of rising. |
The pre-send check refuses a safe height that is not above the stock.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.