Concepts
Feed, speed and chip load
Feed, spindle speed and number of flutes give the chip load: the formula, a worked example, and what happens when the chip is too thin or too thick.
The feed (mm/min) is the speed at which the bit goes through the material; the spindle speed (rpm), the speed at which it turns. With the number of flutes, they give the chip load: the thickness of the chip each flute removes.
chip load (mm) = feed ÷ (spindle speed × number of flutes)
1,000 mm/min ÷ (10,000 rpm × 2 flutes) = 0.05 mm
- Chip too thin: the flute rubs instead of cutting, heats up, burns the wood and dulls. That is often what happens when you lower the feed “to be safe” without lowering the spindle speed.
- Chip too thick: the bit strains, the machine flexes or loses steps, the bit can break.
- Bit makers give a range per material and diameter; the feeds and speeds calculator starts from it, and the operation editor shows the chip load of your settings.
- The plunge feed (straight down) is slower: most bits cut poorly with their tip. A ramp or helix entry spares the tool (see Entering the material).
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.