Skip to content

Concepts

Stepover and depth per pass

How deep the bit goes at each pass and how far apart side-by-side passes are, with starting values for a desktop CNC in wood, plywood and aluminum.

Section of a pocket: the bit (gray) has cleared a first depth; it moves one stepover (bottom arrow) from its previous pass (dashed); the right arrow shows the depth per pass.
  • Depth per pass: how far the bit goes down each time. On a desktop CNC, start from half the diameter in softwood and plywood (1.5 mm for a 3 mm bit), less in hardwood, aluminum or with a long bit; the last pass can be shorter.
  • Stepover: the distance between two side-by-side passes in a pocket or a surfacing, as a percentage of the diameter. 40 to 50% is a good start; above 100%, strips of material would remain. A finish needs a finer stepover.
  • More, shallower passes spare a light machine without necessarily making the job much longer.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.