Skip to content

Cutting tools

Feeds and speeds calculator

Suggested spindle speed, feed rate, plunge, depth per pass and chip load for your material, engagement and machine, with a green, orange or red verdict.

In a tool’s editor, the Feeds and Speeds Calculator suggests suitable feeds and speeds:

  • Material: softwood, hardwood, plywood, MDF, acrylic, polyethylene (HDPE), aluminum, foam;
  • Radial Engagement: the share of the diameter in the cut (100% when slotting, 10 to 40% in a pocket or for finishing);
  • Machine and Spindle: machine class (desktop CNC, rigid hobby router, professional machine), spindle speed range, power, maximum feed rate — read from the active machine, otherwise those of a 3018-type CNC.

The result: a verdict in green, orange or red, explained; the spindle speed, the feed rate, the plunge and ramp rates, the depth per pass, the chip load and the power needed for slotting, with notes (spindle slowed down to keep thick chips, not enough power…). Apply to Tool copies these values. They are cautious starting points: the tool manufacturer’s values come first. In Dusty Studio and the desktop app, the calculator is in the tool editor (Tools tab); the chosen material is remembered.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.