The machine
Control mode
A production layout of the Machine panel that keeps only what you use while machining, and an option that requires it before any send.
At the top of the Machine panel (machine connected), Layout switches between Setup (the whole panel, described above) and Control, a production layout that gathers what you use while machining: state and STOP, incidents, job, position and zeros, jog, spindle and accessories, macros, overrides and a taller console. Settings to check, SD card, Go to, saved positions and the tool length sensor stay in Setup. The choice is kept; the G-code Program window stays available in both.
Require Control mode before sending
A send (job, G-code program, resume, framing, dry run) requested in Setup first switches the panel to Control; check the machine, then send again. The pre-send check and the confirmations stay the same. In Dusty Studio, the same choices are at the top of the Machine tab.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.