Skip to content

The machine

Hour counter and maintenance

Machine and spindle hours per machine, maintenance reminders to adjust for lubrication, belts and bearings, and wear thresholds per tool.

In Machine › Machines… (Studio: machine settings), the counter keeps, per machine, the machine hours (job in motion: no pause, tool change or manual move) and the spindle hours (spindle running, even outside a job). The virtual CNC never counts. A machine that has already been used gets a starting value, which does not trigger any reminder by itself. The counter is written atomically at most every 30 seconds, at the end of a job and on closing: a crash or a reconnection loses 30 seconds at most.

Reminders

Lubrication (50 h), belts (200 h) and bearings (500 h, in spindle hours) are provided at the start. These values are to adjust for your machine: they are not manufacturer recommendations. You can change them, add some, remove some. Done… restarts the count of a reminder from zero, after a confirmation.

A reminder never interrupts a job and never blocks a start: it appears on connecting and at the end of a job, in the Machine panel.

Wear threshold per tool

A threshold in cutting hours, on the wear accumulated in the machining log, which is never changed. Replaced… restarts from zero for the new tool.

Limits

The counter is kept by the host: the app on this Mac, this browser, or Dusty Link for a shared machine. A machine used from several hosts therefore has several counters, with no total. In Studio it is kept by the browser: clearing the site data clears it. The Apple app does not show the counter of a remote Dusty Link.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.