Skip to content

The machine

Positions and macros

Save useful positions in machine coordinates and go back by a safe route, and create macro buttons with keyboard shortcuts, checked like any command.

Saved Positions (Machine panel): bring the tool to a useful place (corner of a jig, tool change position…), then Save Current Position…: a name, then XY Only (the tool will stay at the top of travel when going there) or With Z. Go takes it there by a safe route: up to the top of travel, XY move, then down. Positions are in machine coordinates: homing is required. They are deleted by right-clicking or in the machine settings.

Macros

One button per macro in the Machine panel, to send a series of commands in one click. They are created and edited in the machine settings: a name, then one command per line (; or parentheses for a comment). Three macros are provided at the start: top of travel, back to work zero, settings and state. A macro that starts the spindle (M3, M4) asks for a confirmation before each run; a macro can neither reset the settings ($RST), nor write a manufacturer setting, nor change the startup lines; non-ASCII characters are refused.

Macro shortcut

In its settings, ⌥⌘1 to ⌥⌘9 on Mac and iPad, Alt + letter or digit or F2 to F10 in Studio and the desktop app. A key already in use is refused, with the name of the command or macro that holds it (even when both macros have the same name). An imported profile, or one set before this check, may contain two: only the first macro keeps the key, and the macro list says so. The shortcut only works inside the app, never while typing in a text field, and goes through the same confirmations and checks as the button: spindle, travel, no-go zones.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.