Skip to content

The machine

Smoothieware

Smoothieware over USB or Telnet: what the bridge translates — plain-text answers, HALT and unlock, SD card, M503 settings — and why jogging goes by steps.

USB connection (115,200 baud) or Network (the board’s Telnet, port 23). Smoothieware in GRBL mode already understands most of Dusty’s commands; the bridge translates the rest:

  • answers and errors in plain text (“Unsupported command”), old-style status reports put back into the GRBL form;
  • HALT stop (button, limit switch, STOP): the board refuses everything (!!) until Unlock — Dusty sends $X after an alarm (limit switch, homing) and M999 after a stop; stopping a job (feed hold, then reset) is unlocked straight away;
  • SD card: file list (ls), file run by the board (play), progress read with progress;
  • settings read with M503 (steps per mm, speeds, accelerations), written with M92, M203, M201 then M500;
  • feed override with M220; no continuous jog (Smoothieware does not stop it when the key is released): steps only.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.