Skip to content

Workholding

Table-mounted vise

A milling vise on the table holds blocks, thick parts and soft metals: align the fixed jaw, use parallels, keep the bit above the jaws, zero on the fixed jaw.

A milling vise fixed to the table holds blocks, thick parts and soft metals (aluminum, brass) by side clamping.

On the left, top view: vise fixed to the table, part between the jaws. On the right, side view: parallels under the part, which stands above the jaws.
  • Fix the vise with clamps or screws and align the fixed jaw with the X or Y axis (dial indicator, or a reference face surfaced by the machine).
  • Rest the part on parallels: it stands above the jaws by the height to machine plus a margin. The bit must never go down to the jaws: draw their outline on layer T1.
  • Tighten by hand, then tap the part with a mallet to seat it on the parallels; they must no longer move.
  • Set the work zero on the fixed jaw: it does not move from one part to the next, so the vise becomes an indexing fixture for a series.
  • Remove the vise handle before starting.

This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Dusty, for free.

Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.