Dusty Studio and desktop app
Studio’s Machine tab
The Machine tab of Dusty Studio and the desktop app: machines, USB connection through WebSerial or the system port, jobs, resume, controller settings and what the browser keeps.
The Machine tab follows the Machine panel of the Mac app, with the same safeguards (the core is the same):
- Machines: a list kept in the browser; New Machine… opens the assistant (see Adding a machine); Duplicate, Export… (a
.jsonfile to share) and Import… (the machines of such a file, the first one becomes active). Machine Settings… opens the full profile (see Machine settings), including the custom G-code. G-code Options… sets the machine’s post-processor (see Post-processor options). Probe and Tool Length Sensor… sets the probing plate or block and the fixed sensor (its position is taken on the active machine, connected and homed). The machine’s machining log (finished and interrupted jobs, learned real duration, tool wear, Export the Log (CSV)…) is below the list, the virtual CNC counted apart: see Machining log. - Connection: the virtual CNC (in the page), or the USB port through WebSerial: Chrome or Edge on a computer, with the page served over HTTPS; elsewhere, Dusty Studio explains why the port is not available. The browser asks which port to open. Studio drives GRBL, grblHAL and FluidNC controllers. In the desktop app, a machine whose profile has an address can also be reached over the network (Telnet: GRBL over Wi-Fi or Ethernet, grblHAL, FluidNC); a browser cannot open that connection, and a Duet board (HTTP) is not driven yet. Connection Assistant…: see Connection assistant.
- STOP always visible (top bar and panel), also with Ctrl+. (⌘. on Mac);
- state, positions, incident cards (Understand and Fix… opens the My Machining Is… assistant), homing (all axes or a single one), unlock, zeros, step or continuous jogging, spindle (confirmed start), coolant, vacuum, overrides, console and its cheat sheet, trace of the virtual CNC; jog feeds, plate thickness and spindle speed accept calculations and units like the other fields; Setup or Control at the top of the tab: see Control mode;
- Job: Send the Project… (pre-send check, with the duration corrected by the log, then confirmed start), progress, immediate pause or with retract, confirmed resume, stop; Frame… and Dry Run…: the machine moves, spindle stopped (see Running a job);
- G-code program open: Show the Program… (colored text, wireframe view, summary; double-click a line to resume at that line) and Send the Program…: see Opening and replaying G-code;
- Interrupted job: kept from one connection to the next; Resume… (at the start of the pass or at the line, project heights from when the job started; refused while the position is lost) or Forget: see Resuming an interrupted job;
- Controller Settings…: settings read (
$$), changes shown “before → after” then written after your approval, manufacturer settings folded away, file, automatic backups and restore, Reset ($RST) under confirmation; differences with the profile appear in Settings to Check (fix written after your approval, or Align the Profile with the Machine): see Controller settings; - Surface Leveling (grid, height map kept in the browser, adapted jobs and programs) and Position Check: see Surface leveling and Position check; Calibration…: see Dimension calibration;
- Probing…: the probing assistant, Z plate or XYZ block (see Probing); Probe Z stays in the probing section for the plate;
- Saved Positions (Save the Current Position…, Go) and Macros (Edit…): see Positions and macros;
- Controller SD Card with a grblHAL or FluidNC controller: see SD card.
- Go to, Center finder…, Tool length sensor, keyboard jog: as on Mac (see Go to, Center finder, Tool length sensor); Export Profile… and Import a Profile… under the machine list; Startup: homing offered when connecting and pre-start checklist; in the desktop app, ports excluded from auto-detection under the port choice.
- Help menu: Debug log (kept in the page, Save Debug Log… to attach it to feedback;
?debugin the address opens it from page load, see Debug log), Generate Support Data… (see Support data) and Reset Dusty Studio Settings… (machines, log, backups and preferences kept by the browser erased, after confirmation; saved projects do not change). - If you leave the page during a job over the USB port, the browser asks for confirmation, then Dusty sends STOP. Keep the tab in front during a job: browsers slow down hidden pages.
What the browser keeps. In Dusty Studio, the machine list, the machining log (its last 4,000 lines), the automatic settings backups and the checkpoint of an interrupted job are kept in the browser storage: a few megabytes per site, specific to this browser and this computer, deleted with the site data (private browsing included, when it closes). A job too large for this storage has no checkpoint: Dusty says so, and if it is interrupted, it can only be resumed while the page stays open. The desktop app keeps all this in its data folder, like the Mac app.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.