Tutorials
V-carved sign
The word DUSTY V-carved into a 160 × 60 mm sign with a 60° V-bit, plus a border engraved on the line with the same tool: no tool change.
Open the example — the text “DUSTY” V-carved in a 160 × 60 mm sign, with a border engraved on the line, all with a single V-bit.
- Project: stock 160 × 60 × 12 mm, origin bottom left corner, Z zero top of stock.
- Text: Text tool (T), click the canvas and type your text; Tuffy font (or another outline font), 30 mm, centered on the sign (see Text). Wide strokes give a deeper carving.
- Border: a 150 × 50 mm rectangle with 6 mm rounded corners, 5 mm from the edges, on another paint color (see Paint colors).
- Tool: from the library, the 60° V-bit of 12.7 mm. Enter the exact angle and diameter of yours: the depth depends on them.
- V-carving of the text: maximum depth 3 mm (beyond that, the bottom is cleared flat), 1 mm passes, 600 mm/min (see V-carving).
- Profile of the border: side On the line, depth 1.5 mm, with the same bit: no tool change.
- Preview: about 5 minutes. In the top view, the machined part shows the V bottoms and the sharp corners of the letters.
- On the machine: see Before sending an example to the machine. The sign is not cut out: clamps on the edges, clear of the border. The Z zero must be right: 0.1 mm more or less changes the width of the strokes; prefer probing.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.