Tutorials
Coaster imported from an SVG
A drawing made in a vector program, imported from SVG with its sizes kept, then machined: a pocket for the motif and an outside profile with tabs.
Open the example — a drawing made in a vector drawing program (a 90 mm disc, mountains and a sun), imported as is, then machined in 6 mm plywood.
- Project: stock 100 × 100 × 6 mm.
- Import: File › Import… (⌘I) and choose the SVG. The file’s sizes in millimeters are kept and the stroke colors become paint colors (see Importing); Arrange › Place on Stock › center (⌃⌘C) puts the drawing in the middle of the stock.
- Tool: the 3.175 mm 2-flute end mill.
- Pocket of the motif: 1.5 mm deep, 0.8 mm passes. The shapes of a pocket must be closed (see Pocket and Cleaning up paths).
- Profile of the disc: Outside, 6.3 mm, with 6 mm tabs.
- Preview: about 7 minutes.
- On the machine: see Before sending an example to the machine. Screws in the corners of the stock, clear of the disc. For your own drawing, delete the motif, import your SVG and assign its shapes to the “Motif” operation.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.