Tutorials
Drill bit holder (drilling)
A hardwood block drilled with fourteen holes to store drill bits: peck drilling with two drills and a tool change between the two rows.
Open the example — a 160 × 60 × 20 mm hardwood block drilled with seven 5 mm holes and seven 3 mm holes, to store drill bits.
- Project: stock 160 × 60 × 20 mm.
- Holes: 5 mm circles (back row) and 3 mm circles (front row), 20 mm apart; only their center matters for drilling. Put each row on its own paint color.
- Tools: the 5 mm and 3 mm drills of the library (tools no. 1 and no. 2).
- Drill each row with its drill: type Peck, depth 12 mm (10 mm for the small holes), a peck every 3 mm (2 mm): the drill retracts to clear the chips (see Drill).
- Preview: about 3 minutes; the holes follow the shortest path.
- On the machine: see Before sending an example to the machine. Clamps on the sides of the block; the holes do not go through. Set the Z zero with the 5 mm drill; at the tool change, fit the 3 mm drill and set only the Z zero again.
This manual is also built into Dusty: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Dusty, for free.
Free CNC milling software: design, toolpaths and machine control. Mac, iPad, iPhone, Windows and Linux.